T10 Triplex Pump

Contact

The Weatherford Model T10 is a single-acting triplex plunger pump rated at 10 hp in continuous-duty service and up to 16 hp in intermittent duty. 

This versatile pump is offered with a variety of material and design options that enable its use in a wide range of applications.

Standard Equipment

  • Forged duplex stainless steel or forged carbon steel fluid ends
  • Duplex stainless steel stuffing boxes
  • Disc valve
  • Tungsten carbide coated plungers over stainless steel base or solid ceramic plungers
  • Double extended crankshaft
  • Multiple plunger packing arrangements offered

Optional Accessories

  • Packing lubricators
  • Customized plunger packing arrangements
  • Complete pump packages

Specifications

Rated (HP, kW)
10
7.5
Stroke length (in., mm)
1.58
40.3
Maximum discharge pressure (PSI, Bar)
     T10H
4,400
303
     T10L
1,780
123
Rated rod load (lb, kg)
2,645
1,200
Intermittent duty speed, RPM
450
Maximum continuous duty speed, RPM
325
Minimum speed, RPM
90
Crankshaft dimensions (in., mm)
     Diameter
1.75
44.5
     Length (both sides)
3.75
95.3
Keyway, width × depth (in., mm)
.375 × .1875
9.5 × 4.8
Oil capacity (gal, l)
0.95
4.3
Weight (lb, kg); estimates only
330
149.7
Mechanical efficiency
90%

 

Pump Model
Discharge Connection Sizes (in., mm)
Suction Connection Sizes (in., mm)
T10H
1.0 (25.4) NPT
1.5 (38.1) NPT
T10L
1.0 (25.4) NPT
2.0 (50.8) NPT

 

Standard

Model (standard)
Plunger Diameter (in.)
Gallons Per Revolution
Maximum Pressure PSI
90 RPM
150 RPM
200 RPM
300 RPM
325 RPM
Intermittent Duty 450 RPM
GPM
BPD
GPM
BPD
GPM
BPD
GPM
BPD
GPM
BPD
GPM
BPD
T10H
0.875
0.0123
4,400
1.1
38
1.8
63
2.5
84
3.7
126
4.0
137
5.5
190
0.938
0.0141
3,830
1.3
44
2.1
73
2.8
97
4.2
145
4.6
157
6.4
218
1.000
0.0161
3,370
1.4
50
2.4
83
3.2
110
4.8
165
5.2
179
7.2
248
1.125
0.0203
2,660
1.8
63
3.0
105
4.1
139
6.1
209
6.6
227
9.1
314
1.250
0.0251
2,160
2.3
77
3.8
129
5.0
172
7.5
258
8.2
280
11.3
387
T10L
1.375
0.0304
1,780
2.7
94
4.6
156
6.1
208
9.1
312
9.9
338
13.7
469
1.500
0.0361
1,500
3.3
112
5.4
186
7.2
248
10.8
372
11.7
403
16.3
558
1.750
0.0492
1,100
4.4
152
7.4
253
9.8
337
14.8
506
16.0
548
22.1
759
2.000
0.0643
840
5.8
198
9.6
330
12.9
441
19.3
661
20.9
716
28.9
991

 

Metric

Model (metric)
Plunger Diameter (in.)
Liters Per Revolution
Maximum Pressure BAR
90 RPM
150 RPM
200 RPM
300 RPM
325 RPM
Intermittent Duty 450 RPM
LPM
M3/hr
LPM
M3/hr
LPM
M3/hr
LPM
M3/hr
LPM
M3/hr
LPM
M3/hr
T10H
0.875
0.0465
303
4.2
0.3
7.0
1.4
9.3
0.6
14.0
0.8
15.1
0.9
20.9
1.3
0.938
0.0534
264
4.8
0.3
8.0
1.5
10.7
0.6
16.0
1.0
17.4
1.0
24.0
1.4
1.000
0.0608
232
5.5
0.3
9.1
1.5
12.2
0.7
18.2
1.1
19.8
1.2
27.4
1.6
1.125
0.0769
183
6.9
0.4
11.5
1.7
15.4
0.9
23.1
1.4
25.0
1.5
34.6
2.1
1.250
0.0950
149
8.5
0.5
14.2
1.9
19.0
1.1
28.5
1.7
30.9
1.9
42.7
2.6
T10L
1.375
0.1149
123
10.3
0.6
17.2
1.0
23.0
1.4
34.5
2.1
37.4
2.2
51.7
3.1
1.500
0.1368
103
12.3
0.7
20.5
1.2
27.4
1.6
41.0
2.5
44.5
2.7
61.6
3.7
1.750
0.1862
76
16.8
1.0
27.9
1.7
37.2
2.2
55.9
3.4
60.5
3.6
83.8
5.0
2.000
0.2432
58
21.9
1.3
36.5
2.2
48.6
2.9
73.0
4.4
79.0
4.7
109.4
6.6

General Notes

  1. Capacities shown are based on 100 percent volumetric efficiency. Actual capacities are lower, based on discharge pressure and fluid compressibility.
  2. API-674 and NACE-compliant designs are available; consult Weatherford for details and exceptions to these standards.
  3. For operation below 90 RPM, an auxiliary lubrication system is required.
  4. Standard plunger sizes are shown, however other sizes are available upon request.