W60 Triplex Pump

Contact

The Weatherford W60 triplex power pumps are offered with fluid cylinders of nickel-aluminum bronze, forged carbon steel, or duplex stainless steel. 

A variety of packing and valve arrangements are available to meet the requirements of any application. The critical components of the power end—crankshaft, connecting rods, crossheads, and bearings—are comparatively larger than industry-standard components, which enables them to withstand continuous-duty service and harsh operating conditions.

Applications

  • Amine-gas sweetening
  • Chemical injection
  • Crude transfer
  • Fracturing-fluid recovery
  • Glycol-gas dehydration
  • Horizontal directional drilling
  • Hot-oil truck injection
  • Hydrostatic testing
  • Light-hydrocarbon transportation
  • Methanol injection
  • Municipal jetting
  • Oil production
  • Polymer flood
  • Produced-water disposal
  • Pulp and paper
  • Reverse osmosis
  • Secondary recovery
  • Steam-boiler feed
  • Steel mill descaling
  • Water injection

Specifications

Rated power
60 HP
Stroke length (in./mm)
3.0
76.2
API-674 speed
400 rpm
Maximum speed
500 rpm
Minimum speed
200 rpm
Rated rod load (lb/kg)
4,750
2,154
Weight (lb/kg)
1,145
519
Oil capacity (gal/L)
2.0
7.6
Mechanical efficiency
90%

 

Plunger Size (in.)
Displacement (gal/rev)
Rated Pressure (psi/MPa)
Cylinder Rating
Rated Capacity (gal/min, b/d)
200 rpm
300 rpm
350 rpm
400 rpm (API-674)
450 rpm
500 rpm
1.000
0.0306
5,000
34.5
H
6.1
210
9.2
315
10.7
367
12.2
420
13.8
472
15.3
525
1.125
0.0387
4,780
33.0
7.7
266
11.6
398
13.6
465
15.5
531
17.4
598
19.4
664
1.250
0.0478
3,870
26.7
9.6
328
14.3
492
16.7
574
19.1
656
21.5
738
23.9
820
1.375
0.0579
3,200
22.1
11.6
397
17.4
595
20.2
694
23.1
793
26.0
893
28.9
992
1.375
0.0579
3,200
22.1
M
11.6
397
17.4
595
20.2
694
23.1
793
26.0
893
28.9
992
1.500
0.0688
2,690
18.6
13.8
472
20.7
708
24.1
826
27.5
944
31.0
1,062
34.4
1,180
1.625
0.0808
2,290
15.8
16.2
554
24.2
831
28.3
970
32.3
1,108
36.4
1,247
40.4
1,385
1.750
0.0937
1,970
13.6
18.7
643
28.1
964
32.8
1,125
37.5
1,285
42.2
1,446
46.9
1,606
2.000
0.1224
1,500
10.3
24.5
839
36.7
1,259
42.8
1,469
49.0
1,679
55.1
1,888
61.2
2,098
2.000
0.1224
1,500
10.3
L
24.5
839
36.7
1,259
42.8
1,469
49.0
1,679
55.1
1,888
61.2
2,098
2.250
0.1549
1,190
8.2
31.0
1,062
46.5
1,593
54.2
1,859
62.0
2,125
69.7
2,390
77.5
2,656
2.500
0.1912
970
6.7
38.2
1,311
57.4
1,967
66.9
2,295
76.5
2,623
86.1
2,951
95.6
3,279
2.750
0.2314
800
5.5
46.3
1,587
69.4
2,380
81.0
2,777
92.6
3,174
104.1
3,570
115.7
3,967
3.000
0.2754
670
4.6
55.1
1,888
82.6
2,833
96.4
3,305
110.2
3,777
123.9
4,249
137.7
4,721

General Notes

  1. Capacities shown are based on 100% volumetric efficiency. Actual capacities are lower, based on discharge pressure and fluid compressibility.
  2. Operating power required by the pump is calculated by the formula: HP = (psi × gal/min) / 1,543, where psi is the actual operating pressure in psi units, and gal/min is the actual pumping capacity.
  3. API-674 and NACE-compliant designs are available upon request. Contact a Weatherford representative for specific details and exceptions to these standards.
  4. Standard plunger sizes are shown, however, other sizes are available upon request. Contact a Weatherford representative for performance and pressure ratings.
  5. Contact a Weatherford representative for assistance with pump selection on applications where actual operating inlet pressures are greater than 10% of the rated discharge pressure of the selected pump model.
  6. For operation below 200 rpm, an auxiliary power end lubrication system is required.