Real Results

Performance By The Numbers

Integrated Completion Solution

Saves 27+ Hours of Deepwater Rig Time in Santos Basin, Offshore Brazil

Objectives

  • Efficiently install downhole equipment to complete a deepwater well. To produce this well, the operator required a lower completion with a high-rate pumping capacity, an upper completion with dual production safety barriers, and a V0-rated interventionless-setting production packer for effective annular isolation.

Our Approach

  • Weatherford completion experts met with the operator to review requirements for installing completions equipment and conducting an acid treatment to stimulate oil production from a carbonate formation in a deepwater well.
  • At their workshop, Weatherford technicians designed and fabricated a splice sub to facilitate preparation and testing of tubing-hanger hydraulic and electric lines before shipment to the rig.
  • Weatherford later dispatched a crew to the well and installed the lower completion with an RFID Optibarrier™ ball valve in combination with a WFX0 retrievable sealbore packer to provide fully testable zonal isolation. This configuration facilitated the required pump rate for acid treatment of up to 30 bbl/min. The RFID Optibarrier valve, set at 18,400 ft (5,608 m) MD, surpassed previous setting depths for this valve.
  • For the upper completion, the crew installed the OptiPkr™ hydrostatic-set production packer to deliver a V0-rated, gas-tight seal between the outside of the production tubing and the inside of the casing.
  • The Weatherford crew also set an Optimax™ ultra deep-set safety valve at 9,700 ft (2,957 m), which marked the first such installation in a deepwater well.
  • The crew achieved another deepwater first with the installation of an OptiValve™ bidirectional isolation barrier ball valve, set at 7,250 ft (2,210 m).
  • The RFID Optibarrier valve was closed and successfully pressure tested following the acid treatment. It was subsequently opened using a custom pressure algorithm sent from a remotely operated vehicle (ROV).

Value to Customer

  • Weatherford developed an integrated completion solution that enabled crews to efficiently install the downhole equipment, which saved 27.5 hours of deepwater rig time.
  • The RFID Optibarrier valve took approximately 2.5 hours to fully open to access the formation. Compared to competitor valves, which could take 12 hours to open, the Weatherford valve saved at least 9.5 hours.
  • The splice sub enabled the tubing hanger assembly to be rigged up and tested in the workshop, which saved at least 6 hours of rig time.
  • The OptiValve tubing isolation valve facilitated production tree installation without requiring slickline intervention, which saved 12 hours of rig time.

Learn More

Completions
 
Print Version
Details

Location

Santos Basin, Offshore Brazil

Well Type

Deepwater oil producer

Formation

Carbonate

Hole Sizes

  • 14-3/4 in. to 18,511 ft (5,642 m)
  •  8-1/2 in. to 19,350 ft (5,898 m)

Maximum Inclination

42.5°

Casing Sizes

  • 10 3/4-in., 85.3 lb/ft
  • 10 3/4-in., 109 lb/ft

Temperature

158 to 176°F (70 to 80°C)

Maximum Pressure

6,640 psi (45.78 MPa)

Products/Services

Integrated Completion Solution Saves 27+ Hours of Deepwater Rig Time in Santos Basin, Offshore Brazil

Contact Weatherford

Take the next step in realizing the field of the future. Submit your details and one of our optimization experts will be in touch.