Successfully Drills Vertical and High Dogleg Curve Sections in a Permian Well
Objectives
Drill a full curve section with a high dogleg severity (DLS) in a horizontal well in the Permian Basin.
Our Approach
Weatherford deployed the Magnus rotary steerable system (RSS), HyperLine™ drilling motor, and HEL™ hostile-environment-logging measurement-while-drilling (MWD) system to drill the curve section in a Permian well.
The HEL MWD system transmitted real-time data to enable highperformance directional drilling and good-quality surveys.
Driven by the high-performance HyperLine drilling motor, the Magnus RSS kicked off from vertical at 8,990 ft (2,740 m) and worked at surface speeds from 30 to 40 rpm, downhole speeds of up to 200 rpm, and penetration rates up to 100 ft/hr (30 m/hr).
The team adjusted within these parameters to target the planned DLS of 9°/100 ft (30 m) using a BIAS percentage (or control force exerted by the pads to push the bit) between 60 and 100%.
The Magnus RSS achieved a maximum DLS of 9.89°/100 ft (30 m) at the bottom of the curve section.
The full section was completed at a depth of 10,290 ft (3,136 m) with an inclination of 70° and an azimuth of 183°.
Value to Customer
The Magnus RSS, HyperLine drilling motor, and HEL MWD system enabled the customer to steer with precision, attain an ROP 35% higher than a motor, and drill the planned trajectory in its entirety while achieving the planned dogleg requirement of 9°/100 ft (30 m).