Sample from MFT-D Sampling Station 1 displays the pressure response (red line) recorded during the pretest and pump-out phases. The drawdown mobility was 292.6 mD/cP, with a formation pressure of 1339.88 psia. The fluid resistivity sensor was coated with oil-based mud (OBM), making it unsuitable for fluid identification. Therefore, only the capacitance sensor (orange line) was used.

Sample from MFT-D Sampling Station 2 shows the pressure response (red line) recorded during the pretest and pump-out stages. The drawdown mobility was measured at 150.1 mD/cP, with a formation pressure of 1689.82 psia. Due to OBM coating the fluid resistivity sensor, it was unsuitable for fluid identification. Therefore, only the capacitance sensor (orange line) was utilized. The capacitance reading transitioned from an initial mud response of approximately 50.0 pF to a stable low value of 30.2.