Real Results

Performance By The Numbers

Compact Logging Tools and Interpretation Service

Identify Bypassed Pay Zone and Increase Potential Oil in Place by 50%

Objectives

  • Characterize a formation using wireline logging tools in an 8 1/2-in. well in the Orinoco heavy-oil belt. Identifying petrophysical properties would be challenging because of the low-resistivity, high-thorium content of the formation. Additionally, previous logs and interpretation services performed in the formation indicated high water saturation.
  • Determine whether hydrocarbons are present in the formation. Previous formation analysis could not identify the presence of hydrocarbons. As a result, the operator had concluded that this was a no-pay zone.

Our Approach

  • Weatherford recommended its suite of Compact™ logging tools: the microimager (CMI), triple-combo tools, spectral gamma ray (SGS) tool, and formation pressure tester (MFT). The team deployed the triple-combo tools alongside the SGS tool, followed by the CMI and the MFT.
  • All the Compact logging tools ran downhole in a single trip to a logging depth of 4,700 ft (1,433 m) with no issues, despite the complex conditions in the formation.
  • Together, these tools gathered data that enabled an integrated interpretation of formation characteristics.
  • During formation analysis, the team identified a pressure-point gradient (seen in the depth versus pressure plot, upper right) that revealed hydrocarbon values in the formation.

Value to Customer

  • The combination of data acquired from the Compact logging tools and Weatherford formation-interpretation services enabled the operator to confirm the presence of a previously bypassed zone and reclassify the well as a potential producer.
  • These results will enable the operator to increase oil in place by approximately 50% and to increase oil production throughout the field in the near future.
Details

Location

Anzoátegui, Venezuela

Well Type

Onshore, vertical, heavy oil

Formation

Cretaceous

Hole Size

8-1/2 in.

Logging Depth

4,700 ft (1,433 m)

Total Volume Depth

4,900 ft (1,494 m)

Products/Services

The figure shows the true vertical depth (ft) versus pressure levels (psi) in the well

Contact Weatherford

Take the next step in realizing the field of the future. Submit your details and one of our optimization experts will be in touch.